A New Approach to High-Order Boussinesq-Type Equations with Ambient Currents   总被引：6，自引：3，他引：6  

王亚玲张洪生  缪国平朱良生 《中国海洋工程》2005,19(1):49-60

A new approach to high-order Boussinesq-type equations with ambient currents is presented. The current velocity is assumed to be uniform over depth and of the same magnitude as the shallow water wave celerity. The wave velocity field is expressed in terms of the horizontal and vertical wave velocity components at an arbitrary water depth level. Linear operators are introduced to improve the accuracy of the kinematic condition at the sea bottom. The dynamic and kinematic conditions at the free surface are expressed in terms of wave velocity variables defined directly on the free surface. The new equations provide high accuracy of linear properties as well as nonlinear properties from shallow to deep water, and extend the applicable range of relative water depth in the case of opposing currents.  相似文献   

筒型基础沉贯阻力估算方法   总被引：1，自引：0，他引：1  

何炎平 《海洋工程》2002,20(3):23-28

系统地总结国外有代表性工程实践对筒型基础沉贯阻力的研究 ,并将各种方法综合起来 ,提出了加权综合估算法 ,供今后的研究和工程实践参考  相似文献   

东太平洋地区DSDP573孔始新世末期的微玻璃陨石   总被引：5，自引：1，他引：5  

尹延鸿  万天丰  孙嘉诗 《海洋地质与第四纪地质》2001,21(4):37-42

通过研究 DSDP5 73孔的岩心样品 ,首次在该孔始新世与渐新世的界线地层含金属粘土层中发现了微玻璃陨石 ,且主要富集在其底部。一个样品 (5 g)中最多可达 12粒。这些微玻璃陨石主要呈球形、椭球形。用电子探针测试了其化学成分 ,Si O2 含量为 2 9.6 4%～ 5 8.93%,Al2 O3 为 3.42 %～ 2 0 .96 %,Fe O为 9.98%～ 2 9.5 5 %,Mg O为 4.32 %～ 16 .0 5 %,Ir为 0 .0 6 %～ 0 .81%。总体来说 ,微玻璃陨石的化学成分变化较大 ,可能与靶岩的成分变化较大有关。始新世末期北美微玻璃陨石场的展布方向约为 2 5 0°,这与太平洋板块运动方向改变所需要的矢量变化(2 45°)仅相差 5°,推测很可能是始新世末期陨星的撞击引起了太平洋板块在该时期的运动方向由 NNW突然变为NWW。  相似文献   

三峡及邻区晚第三纪以来构造应力场特征探讨     

贾永刚  单红仙 《海洋科学》1995,19(2):36-41

用三峡及邻区（东经１０８°～１１３°，北纬２９°～３３°）地质资料，地震资料，现 场地应力测量资料论证三峡及邻区晚第三纪以来构造应力场稳定性及其分区特 征。  相似文献   

地质环境特征及工程适应性与选择性分析——青岛市城市地质环境研究     

贾永刚  谭长伟  宋卓利 《中国海洋大学学报(自然科学版)》1997,(2)

根据地形地貌、地质构造、水文地质条件将青岛市划分为６个工程地质亚区，论述了各亚区地质环境特征，结合不同城市建筑工程特点，进行了工程场地适应性和选择性分析评价，为充分合理利用城市地质环境提供良好依据  相似文献   

Static Analysis of Collision Strength of Offshore Platform     

Li Runpei Chen Weigang Gu Yongning Professor  Shanghai Jiao Tong University  Shanghai Assistant  Shanghai Jiao Tong University  Shanghai 《中国海洋工程》1996,(1)

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.  相似文献   

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Dynamic Analysis of a Single-Column Platform (II)     

Lian Gan  Ni Kan  Hu Kai Guo Dawei . Professor  Senior Engineer  Marine Design & Research Institute of China  Shanghai . Senior Engineer  Marine Design & REsearch Institute of China  Shanghai . Engineer  Marine Design & Research Institute of China  Shanghai 《中国海洋工程》1992,(4)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献